Top Tech Questions - You've Got Questions? We've Got Answers! at Automotive.com
»Locate a Dealer»Find a Used Car»Get Financing

Top Tech Questions

Below is the Diesel Power magazine article Top Tech Questions - You've Got Questions? We've Got Answers! read the article, browse photos from the article, or search related articles in the Automotive.com Enthusiast Central.
Top Tech Questions - You've Got Questions? We've Got Answers!
Top Tech Questions Towing

Top Tech Questions - You've Got Questions? We've Got Answers!


Text Size

Towing Troubles
Part Two

Q: I own an '06 Dodge Ram 2500 Quad Cab that has 47,000 miles on it. I've performed some modifications to the truck, like a K&N cold-air intake, 5-inch turbo-back exhaust, CFM Plus intake elbow, and a Bully Dog programmer with a boost fooler. I tow a 21-foot toy hauler with three quads--all together the trailer probably weighs around 10,000 pounds loaded. When I go to Flagstaff, Arizona, to ride, there is a hill that is an 18-mile climb. When going up the hill, my EGTs will get as high as 1,250 degrees. Some people say it is OK, and others say it is too hot. What's the real answer?

Bill Shaw
Henderson, Nevada

A: This is another common question we get here at the magazine. A lot of our readers tow, and while there isn't really one right answer, there are guidelines. Think of exhaust gas temperatures as sticking your hand in a hot oven. If you put your hand in just for a split second (say, to put some pizza in there) you're none the worse for wear. But if you leave it in (your hand, or the pizza) for a longer period of time, it will get burned. A similar effect occurs in diesel engines. While seeing 1,500 degrees on the pyrometer for a few seconds is usually OK, having it pegged at 1,500 for five minutes is sure to cause damage. While 1,200 degrees is often considered the limit for prolonged towing, time is also a factor in how an engine will respond to high EGTs. Engine design also comes into play, as the newer common-rail engines are built to handle higher temperatures from the factory.

Common-rail Cummins diesel engines are among the best heat handlers on the market today, so we'd say your 1,250 degrees is still on the safe side, but just barely. Anything above 1,300 should be kept to a few minutes, and anything above 1,400 should be limited to just a few seconds. Keep in mind these are also conservative maximums--we know of a few Dodge Cummins owners who have towed at 1,400 degrees for five minutes and lived to tell about it, but we'd never recommend someone actually go out and try it. Also, all of these temperature recommendations are pre-turbo--if your pyrometer sensor is mounted in the downpipe instead of the exhaust manifold, we'd try to stay below 1,000 degrees while towing.

If you're still worried about your exhaust gas temperatures, installing an aftermarket intercooler or water injection kit is a sure way to lower your towing EGTs. Expect a 100- to 200-degree drop with either one of these add-ons, which will bring your truck well below the safe towing threshold. If it were us, we'd probably just keep our eye on the gauge, and try to keep it below 1,300 degrees.

Related Articles

When NASA's space shuttle first went into service 30 years ago-yes, it's been that long-nobody ever intended it to be flying for three decades.
This essential guide for owners of Chevy trucks built from 1955 through 1960 provides step-by-step instruction on frame and chassis cleaning, suspension rebuilding and upgrade...
How to build small-block Chevy engines for maximum performance.
Here's what we've come up with so far on our 1972 Toyota Hilux project truck.
Currie and Baer Help Us Build an Affordable Race-Ready Axle
Page Prev 1 2 3

FIND A CAR