|
|
|
|
IntelliChoice Value Rating
The chart above shows the purchase price versus ownership cost for each car from a specific vehicle class. The cars with better than average ownership cost/purchase price correlations are the best values, and these best value cars are represented by the dots below the curve. (i.e. the cars that have a lower ownership cost compared to its purchase price.) Those cars, which are worse than average or poor values, appear above the curve.
One way to view the graph is to draw a vertical line through any purchase price. You may see several dots that fall on this line - each of which is a car with a similar purchase price. However, notice the difference in ownership costs of each car represented by the vertical position of the dot. Two cars with the same purchase price can have thousands of dollars difference in ownership costs. This is what separates "good value" cars from "poor value" cars.
What is a good car value?
A "good car value" is one whose cost to own and operate is less than expected. The lower the cost to own and operate a car compared to what is expected, the better the value of that car.
But how do we know a car's "expected cost"?
For each car in the class, IntelliChoice plots the car's purchase price against the total five-year cost to own and operate it as determined by IntelliChoice research. Each dot on the above chart represents a specific car. Generally, we find that as the purchase price of the car increases, the cost to own and operate that car increases. This is why the dots on the graph tend to rise upward and to the right. This phenomenon also makes intuitive sense - as the purchase price rises, financing costs tend to rise, as do insurance, depreciation, taxes, and most other car ownership costs.
This is an important concept. It's normal for car ownership costs to rise as purchase price rises. Therefore, we can't just establish one "average" ownership cost number for each class, since cars in the class have different purchase prices. (This is why the "Relative" shown on each chart is different for cars in the same car class.)
Using statistical techniques, IntelliChoice "connects the dots" to form a curve that defines, for this car class, the relationship between the car's purchase price and car's ownership costs. This curve is our "expected cost" curve. The curve defines, for any car in the class, the five-year ownership cost that we would expect to see at each possible purchase price. If every car in the class were an average value, then all the dots would fall exactly on the curve. However, it's rare that any dot is exactly on the curve. Some dots are a little higher or lower, and some are a lot higher or lower. The dots that are a little lower are better than average car values, while the dots that are a lot lower are excellent car values (A dot that is a lot lower than the curve has ownership costs much lower than expected for a car of its purchase price). Conversely, a dot a little higher than the curve is a poorer than average car value, while a dot that is much higher than the curve is a poor car value.
Value is a relative term, not an absolute term. It is performing better than the logical expectation.
So is a Mercedes-Benz E320 expensive to own and operate? Certainly in an absolute sense. Most other cars cost less. But, when its cost to own and operate is plotted against cars with comparable invoice prices, the E320 costs less. So the E320 is not expensive to own and operate - it is a good car value. The Mercedes does not have low ownership costs, but it has low ownership costs for its invoice price.
|
|
|
|
|
|
|
Article From Diesel Power Magazine
2004 Dodge Ram 3500 Cummins Bumper - No Pain No GainBumper Beef For Your Late-Model Diesel Pickup / By Robin Stover / photographer: Robin Stover /
Article provided by: Diesel Power Magazine
 In the bumper arena you basically have three choices. You can either build one from raw materials yourself while buddies look on and gawk at your fabrication skills (or lack thereof); or you can plunk down the money to be different and find a company who has the bumper you're looking for. The third choice is to simply remain part of the generic-looking, factory-equipped populace and ignore your aftermarket bumper agenda altogether. Chances are, if you're one of those people, you've already flipped past this article in search of that advertisement for the company who thinks revealing pictures of beautiful young women somehow help to sell tires. As for those of you still reading who actually would smash their piggy banks and invest time researching bumpers to see what appeals to them, the task is tedious. This is partially because aftermarket bumpers come in many styles, but also because the burden of finding one is complicated by additional accessories, such as lights, tow hooks, finishes, and even the materials used in their construction. So, why do it? Well, it's simple: A custom bumper rounds out the aesthetics of a vehicle while providing crucial protection from foreign objects that can unknowingly impede your path, like ill-fated reindeer and small children. Well, maybe not the latter, but we're sure most small children will agree: A set of custom bumpers sure makes a truck look tough. Road Armor of Eugene, Oregon, builds custom bumpers that command attention and leave wayward cattle scampering for the barnyard. Recently, we observed an install at Auto Concepts in Helena, Montana. The donor vehicle was a 2004 Dodge Ram 3500 Cummins turbodiesel. You may remember a similar-looking bumper from the short-lived blockbuster "The Fast and the Furious." Road Armor supplied at least a dozen cattle catchers for the movie to aid the efforts of stopping police cars during high-speed chase sequences. The only difference with our unit (other than we have no plans for vigilante antics associated with street racing) is that ours was ordered without the Titan II Intimidator over-the-hood brushguard. Road Armor uses state-of-the-art technology to design and build each and every bumper in their extensive portfolio. All standard bumpers they build are available for shipment the same day the order is placed and each comes with a lifetime warranty. Varying greatly in price, most fullsize truck buyers can expect to spend around $1,300 for the basic-front Stealth model, and around a grand for a rear like the one shown in this article. Each model comes powdercoated with all the necessary mounting hardware and can be shipped right to your door on a large pallet (forklift not included). "Custom bumpers that leave wayward cattle scampering for the barnyard!"  Once the factory front bumper was removed, the guys from Auto Concepts installed four PIAA 510 auxiliary lights into the provided openings. Road Armor carries PIAA lighting products and recommends them for a perfect fit with each bumper they build. |  It took two people to pick up and mount the new bumper on the front of the truck. Two brackets are provided with the bumper. They utilize existing frame holes to simplify installation. |  This picture shows the above-mentioned Road Armor bracket where it mounts to the truck's frame. Notice the slotted holes, which make the bumper easy to adjust and fit up. |
 These recessed light mounts look trick and protect the lights from damage or theft. |  Surprisingly, the rear bumper was more difficult to install than the front. It required removal of the factory receiver hitch. |  Once mounted, the bumper looked nice and will surely help protect the truck if a rear-end collision ever occurs. |
 The rear bumper also has auxiliary light mounts incorporated in it. Road Armor supplied our customer with two PIAA 1490s, which fit perfectly. We wired these directly to the rear backup light circuit. |  Light Force manufactures high-quality off-road lighting systems for just about any application. Our Road Armor bumper had to be drilled before mounting a set of RMDL170 lights. A few nice design elements Light Force uses include durable polycarbonate housings, shatterproof lenses, high-performance Xenophot bulbs, high-efficiency parabolic reflectors, and a satisfaction guarantee. We like the easy-change yellow fog lenses included in our set. They actually worked killer in thick fog. For more info, check out www.lightforceusa.com. | |
|
Dodge prices 2007 Nitro and Ram 3500 Chassis Cab
Auburn Hills, Mich, Aug 23, 2006 - On the heels of the hot-selling all-new 2007 Dodge Caliber, two additional all-new...
04/23/2007 | 21:04 PM
|
|
2007 Dodge Ram 2500 and 3500 Meet EPA Emissions Rules
Washington, D.C., Jan 23, 2007 - Today at the Washington (D.C.) Auto Show, the U.S. Environmental Protection Agency...
04/23/2007 | 21:04 PM
|
|
2008 Dodge Ram Resistol Edition Covers Driver's Head
Dallas, Texas, Sep 27, 2007 - At the Texas State Fair today, Dodge will introduce the new Resistol Edition 2008 Dodge...
09/27/2007 | 13:09 PM
|
|
2008 Dodge Grand Caravan Cargo Van All-New for Business
Auburn Hills, Mich., Aug 29, 2007 - Designed for commercial use, the all-new 2008 Dodge Grand Caravan cargo van is a...
09/03/2007 | 15:09 PM
|
|
Ford and Dodge Slammed by Product Liability Lawsuits
In a stinging one-two punch, both Ford and Chrysler have been slapped with lawsuits tied to alleged flaws in their...
01/02/2008 | 16:01 PM
|
|
|
2005 Dodge Ram 3500
Had to replace fuel injectors on 2005 dodge Ram 3500 at my expense. Mechanic said water in diesel. Anyone else had...
10/29/2006 | 04:10 AM
|
|
|
2004 Dodge Ram fuel injector problems
On my 2005 dodge Ram, I paid for replacing all fuel injectors - no warranty. Was told water in diesel. I've heard of...
12/04/2006 | 07:12 AM
|
|
|
New Car Best Deals for May 2006
CAMPBELL, Calif.--(BUSINESS WIRE)--May 5, 2006--PRIMEDIA's IntelliChoice.com, the leading source for automotive...
05/05/2006 | 17:05 PM
|
|
|
Dodge Ram 1500 4X4 5.9 bad tranny?
Has high miles (214,000), but I only put 400 on it since I bought it last year. Does not like to shift into reverse or...
10/10/2006 | 19:10 PM
|
|
|
Looking at buying a new truck
I have been in the market for a new truck for a while. I have test drove a ford F350 crew cab short box, a chevy 3500...
03/04/2006 | 06:03 AM
|
|
|
|
| |